KOYOTO TITANIUM HYD HVI 150 range of lubricants are high viscosity index an-wear hydraulic fluids formulated with high quality HVI base stocks and advanced an-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
Applications
These HVI oils are designed for use in Hydraulic applications subjected to wide temperature variations.
- Suitable for use in hydraulics of Marine, Industrial & Earth moving; where temperatures vary seasonally
- Applications where HVI an-wear lubricant is required: servicing gears & bearings, air compressors etc.,
Characteristics
Specifications
KOYOTO TITANIUM HYD HVI 150 series meets or exceeds following International and Builder specifications:
- DIN 51524 Part 3 HVLP type
- Denison HF-0, HF-2 (T6H20C)
- Cincinnati Machine P68, P69, P70
- ISO 6743/4 HV
- VICKERS M-2950S, -I-286
- VICKERS 35VQ25, 104C
Typical Characteristics
| KOYOTO Titan HYD HVI |
Test Method |
Units |
15 |
22 |
32 |
46 |
68 |
100 |
150 |
| ISO Viscosity Grade |
ISO 3448 |
— |
15 |
22 |
32 |
46 |
68 |
100 |
150 |
| Density @ 15 0C |
ASTM D 4052 |
gm/cc |
0.845 |
0.864 |
0.870 |
0.878 |
0.880 |
0.887 |
0.894 |
| Viscosity @ 40 0C |
ASTM D 445 |
cSt |
15.6 |
22.9 |
32.4 |
46.8 |
68.9 |
100.8 |
150.2 |
| Viscosity @ 100 0C |
ASTM D 445 |
cSt |
3.99 |
5.12 |
6.46 |
8.41 |
11.27 |
13.21 |
16.85 |
| Viscosity Index |
ASTM D 2270 |
— |
161 |
160 |
156 |
156 |
156 |
128 |
120 |
| Pour Point |
ASTM D 97 |
°C |
-39 |
-39 |
-36 |
-36 |
-36 |
-33 |
-33 |
| Flash Point (COC) |
ASTM D 92 |
°C |
174 |
204 |
224 |
230 |
234 |
246 |
252 |
| Copper Strip Corrosion |
ASTM D 130 |
— |
1A |
1A |
1A |
1A |
1A |
1A |
1A |
| Rust Characteristics Proc B |
ASTM D 665 |
— |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
| Foam Seq I,II,III |
ASTM D 892 |
ml/ml |
20/0 |
20/0 |
20/0 |
20/0 |
20/0 |
20/0 |
20/0 |
| Demulsibility, 40/40/0 |
ASTM D 2896 |
min |
10 |
10 |
15 |
20 |
20 |
25 |
30 |
| TAN, mg KOH/g |
ASTM D 1401 |
– |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
en 
Arabic
French
Spanish
There are no reviews yet.