KOYOTO XTREME PROTECT GREASE EP 0 series are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20°C to 140°C, while EP 00 & 0 greases are suitable for operating temperatures range from -25°C to 130°C.
Applications
KOYOTO XTREME PROTECT GREASE EP 0 are suitable for most types of Marine, Automotive & Industrial
- KOYOTO XTREME PROTECT GREASE EP 0 00, EP 0 and EP 1 are suitable for centralized lubrication systems and other applications where low temperature performance and effective leakage control are required.
- KOYOTO XTREME PROTECT GREASE EP 0 2 and EP 3 are suitable for antifriction and plain bearings, bushings and pins, operating under moderate to severe load conditions & in applications with high moisture ingress.
- EP 2 Moly, fortified with MoS2 is suitable for use in bucket pins, pivot pins & fifth wheels.
Characteristics
KOYOTO Xtreme Protect Grease EP |
Test Method |
Units |
EP 00 |
EP 0 |
EP 1 |
EP 2 |
Ep 3 |
Ep 2 Moly |
NLGI Grade |
ASTM D 217 |
— |
00 |
0 |
1 |
2 |
3 |
2 |
Thickener Type |
— |
— |
Li-Cx |
Li-Cx |
Li-Cx |
Li-Cx |
Li-Cx |
Li-Cx |
Penetration, Worked @ 25 0C |
ASTM D 217 |
0.1mm |
400-430 |
355-385 |
310-340 |
265-295 |
220-250 |
265-295 |
Viscosity @ 40 0C |
ASTM D 445 |
cSt |
220 |
220 |
220 |
220 |
220 |
220 |
Dropping Point |
ASTM D 566 |
°C |
– |
220 |
230 |
230 |
230 |
230 |
4-Ball Wear, Scar |
ASTM D 2266 |
mm |
0.5 |
0.4 |
0.4 |
0.4 |
0.4 |
0.4 |
4-Ball Weld Load |
ASTM D 2596 |
Kg |
310 |
315 |
315 |
315 |
315 |
380 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
There are no reviews yet.